Nuclear Radiation Detector Professional Radiation Measurement

• Customization: Available
• Portable: Portable
• Customized: Customized

Product Description

Description

I. Introduction

II. Operation

1.Display

 

Press Enter/confirm button to set your Nuclear Radiation Detector

 

.Rate alarm
(0.50/1.00/1.50/2.00/2.50/5.00/10.00/50.00/100.0)μSv/h
.Dose alarm
(0.50/1.00/1.50/2.00/2.50/5.00/10.00/50.00/100.0)mSv
.Alarm mode
Buzzer/Motor/Buzzer&Motor
.Wifi
Setup Wifi
.Delete dose
Yes/No
.Send data
On/Off
.LANGUAGE
Chinese/English

 

2.Indicators

 

Red: alarming
Blue: charging
Green: fully charged

 

3.Buttons

4.Charging &Data interface

for 5V/1A charger only

 

5.Reset

 

6.Clip

 

III.Data exporting

 

Procedures

 

1.Prepare a computer installed with Windows OS

2.Copy data exporting tool "tpd-data.exe" (provided by
LITONLASER) to the computer

3.Connect computer and Nuclear Radiation Detector using a USB cable4. Run software and you will see the page as below:

 

5.Click"Connect"button

6.Click"Query Data"button

7.At the end of data exporting, the following data curves
appear (YELLOW curve represents cumulative dose, BLUE
curve represents real-time dose rate)

 

8.Under the folder where "tpd-data.exe" is located, a CSV
format file named by exporting time is automatically generat
ed, as follows:

 

Note: The default data storage capacity is one week, every two
seconds for one data point, about 3 million data points total,
exporting time is about four minutes.

Technical

Detector	Digital Scintillation Detector
Inherent error	≤±10%
Energy response	≤±10%
Dose rate range	0.01 µSv/h~10 mSv/h
Energy range	50 KeV~1.5 MeV
Sensitivity	25 CPS/µSv/h(@662 KeV)
Response time	≤2s
Alarms	Audible/Light/Vibrate
Power	Integrated Lithium Battery
Battery life	150hrs
Connection	WiFi
Size	83mm×56mm×23mm